When tuning trucks (but also agricultural vehicles, construction or forestry machines) the aim is to increase performance (torque) and/or reduce consumption. In this respect, eco and sustainability are also very important here!

Trucks, agricultural vehicles, construction or forestry machines are expensive to buy. Most of the time, the next higher performance level (i.e. the certainty that it will do the intended work) costs much more than if you achieved the additional performance on a smaller version through chip tuning. So it is important to consider the potential of chip tuning when buying! However, the performance potential that can be achieved with chip tuning is not a dream concert! There are performance limits that cannot be overcome by chip tuning alone. So ChipTuningPower cannot do magic!

As an additional side effect, these vehicles have a non-negligible reduction in consumption, which increases profits after a short depreciation period.

However, the reduction in consumption in these vehicles also depends very much on the application and operating conditions:

  • Traffic distributor
  • Full load or part load operation
  • Weight of cargo
  • Topography of the area of ​​application
  • Climate in the operational area

In 2005, ChipTuningPower was one of the first to develop map optimizations for the engine management of heavy-duty vehicles. We had set ourselves the goal of achieving an increase in performance and a reduction in consumption without jeopardizing the exhaust gas values ​​and pollutant load, as well as the longevity of the engine. The results were amazing and often exceeded even our expectations! In the test vehicles, savings of 14% to 22% were achieved in mixed operation.

Meanwhile almost 20 years have passed. Thanks to our experience in many areas of application that were unexpected for us (e.g. combine harvesters, mobile truck wood shredders, trucks with concrete pumps, etc.), we were able to successfully implement our service and often solve problems as a result.

The table below shows how, at a diesel price of CHF 2.35/litre, a rather conservatively calculated reduction in consumption of 15% leads to a very rapid depreciation of the investment (often within six months). The consumption and cost reduction 1:1 then leads to an increase in profit.

Truck consumption optimization

There is enormous savings potential in your truck or in your fleet! With our truck ECO tuning, fuel savings of up to 15% can be achieved. The costs of transport companies (fuel, other supplies, heavy vehicle charges, etc.) are constantly increasing and making work in this industry more difficult every day. Isn't it high time to do something about it?

ChipTuningPower offers you to use your truck more effectively by optimizing truck consumption and to generate more power in a lower speed range, which leads to a reduction in consumption and thus a saving of 2 - 5 liters per 100 km. This applies to vans, small trucks and also to larger trucks such as articulated lorries, tankers, car transporters, moving vans or municipal vehicles. In addition, we can also reduce the consumption of the additive Adblue through our software optimization.

Agricultural consumption optimization

The engine power of many agricultural and farming machines, such as tractors, tractors, combine harvesters and choppers is designed for standard applications and designed for diesel fuel. This performance is often sufficient for e.g. B. wet clippings or heavy soil (and even worse when using biodiesel). A few more horsepower and a higher torque would be very helpful, e.g. B. to increase the working speed, especially in today's contractors, and at the same time to reduce fuel consumption. But who wants to buy the next larger, significantly more expensive model for it?

ChipTuningPower offer you noticeably increased engine performance (up to 20%) with a simultaneously improved torque curve. By changing the engine control, we achieve an optimization of the air masses and an increase in engine torque of up to 200 Nm. You no longer have to constantly push your engine to its performance limit and thus achieve fuel savings of up to 15%. Individual adjustments with the same result are also possible for vehicles powered by biodiesel.

Construction machine consumption optimization

Individual software optimizations to reduce fuel consumption by up to 15% are also available from ChipTuningPower for construction machines such as dump trucks, excavators, wheel loaders, caterpillars, rollers, cranes and augers. We have already equipped numerous construction machines with our consumption optimisations. Don't you want to reduce the operating costs of your construction machinery and gain a real competitive advantage on the next construction site?

Forest machine consumption optimization

Forestry is an important economic factor throughout Europe. Around 5 million cubic meters of wood are harvested in Switzerland alone every year. ChipTuningPower also offers ECO software optimization for forest machines such as haresters, forwarders, skidders and log tractors. The resulting increased engine torque helps your commercial vehicle to work more effectively on difficult ground conditions. The fuel saving is up to 15%. As a positive side effect, the vehicle's pollutant emissions are reduced.